IBM 135E Full-Electric Injection Blow Molding Machine
An IBM-E machine with a 960 cm³ injection volume, 1,500 kN injection clamping force and a published product range from 15 mL to 1.5 L.
IBM 135E
An IBM-E machine with a 960 cm³ injection volume, 1,500 kN injection clamping force and a published product range from 15 mL to 1.5 L.
- IBM-E series configuration
- Manufacturer specifications updated September 2026
- Machine and mold selection reviewed for the bottle project
IBM 135E technical overview
Reference specifications are shown below. Final specifications depend on the quoted configuration, resin, mold and bottle project.
- Product range
- 15 mL–1.5 L
- Injection volume
- 960 cm³
- Injection weight
- 672 g HDPE/PS
- Clamping force (injection / blowing)
- 1,500 / 250 kN
- Maximum product size
- H240 × Ø120 mm
- Machine dimensions (L × W × H)
- 7.5 × 2.7 × 3.85 m
- Machine weight
- 22 t
Process and platform notes
- Use the published platen dimensions, mold thickness and opening stroke to discuss the mold plan with LIANXIN.
- Confirm the installation space, lifting plan and utility configuration against the quoted machine.
IBM 135E full specifications
Manufacturer specifications, updated .
| Parameter | Specification |
|---|---|
| Screw diameter | 70 mm |
| Screw L/D ratio | 21 |
| Maximum injection volume | 960 cm³ |
| Injection weight (HDPE/PS) | 672 g |
| Maximum injection pressure | 1250 bar |
| Maximum screw stroke | 260 mm |
| Screw speed | 250 rpm |
| Barrel heating power | 19 kW |
| Heating zones | 5 |
| Injection clamping force | 1500 kN |
| Blow clamping force | 250 kN |
| Mold opening stroke | 160 mm |
| Rotary table lifting height | 85 mm |
| Maximum platen size (L × W) | 580 × 1200 mm |
| Minimum mold thickness (±0.05 mm) | 280 mm |
| Mold heating power | 8 kW |
| Ejection stroke | 300 mm |
| Rectifier module power | 30 kW |
| Hydraulic pressure | 40 kW |
| Product volume | 0.015–1.5 L |
| Maximum product height | ≤ 240 mm |
| Maximum product diameter | ≤ 120 mm |
| Dry cycle time | 4 s Unloaded machine cycle; this is not the bottle-production cycle or guaranteed output. |
| Minimum compressed-air supply pressure | 1.2 MPa |
| Compressed-air consumption | ≥ 0.8 m³/min |
| Cooling water flow | 3.5 m³/h |
| Machine dimensions (L × W × H) | 7.5 × 2.7 × 3.85 m |
| Machine net weight | 22 t |
| Total rated power | 175 kW |
Request an IBM 135E project quotation
Share your bottle drawing, picture or target volume. We’ll review machine selection, mold coordination and your project requirements.
Email our teamlx@zjglx.comPhone / WhatsApp+86-13338673537Questions about IBM 135E
Published material scope, model selection, support and coordinated mold review.
More machines in the IBM-E Series
IBM 30E
A full-electric servo machine using ETHERCAT control for precise, quiet and energy-efficient production.
IBM 50E
A full-electric servo machine balancing precise plastication, stable clamping and low-impact mold movement.
IBM 80E
A full-electric IBM-E platform with a 680 cm³ injection volume and product range up to 1 L.